Playing with Shadows

I decided to take on an easier challenge, in comparison to my dandelion :) This project involved cutting paper in the form of a flower. Each square is 6"x6".

The end products!

The pieces of cut out paper, glued onto a paper backing

The challenging part, cutting it while keeping it in one piece

I wanted to highlight the stencil quality of the cut out so I decided to elevate the stencil from the paper.

The elevated cut-out added a whole new dimension of shadows that I really like.

 Playing with Shadows!

Dandelion making

Overall this what the making process looked like.

1) Brainstorm idea, buy materials, and make test samples to make sure the idea works

2) Paint skewers, cut paper, roll and attach paper to end of skewers. Lots of them...150ish? Listen to jazz as you work :)

 

3) Add foam clay to the bottom of the skewers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4) Paint foam ball

5) Begin inserting skewers into foam

 

6) Make the flying tufts with the fishing wire and hanger. Insert into the foam and hope it works!

 

 

7) Cover lamp pole with green poster board

8) Cut, color, and curl green poster board for the part right under the foam

 

9) Cut a ring into bottom of foam and insert on top of lamp pole

And the dandelion is complete!!

Dandelion in the Day

 Here are some pictures I took today.

Biggest dandelion I've ever blown :) Maybe that means I get more than one wish?

Details- Skewers painted white, with brown clay and snipped and rolled white paper. Foam core painted green.

Frilly green paper- cut, colored for the browned dying edges, and curled

I was originally going to make a dandelion that would hang from the ceiling, mainly because I wanted to make the lone tufts look like they were flying away in the wind. Because I don't have a ceiling that I wanted to permanently put nails into and hang dandelions from, I was going to make a makeshift ceiling from cardboard, attach it to the garage ceiling and then hang my art work from that. In the end, I decided it wasn't going to be worth the trouble of figuring out the details of how I was actually going to execute my plan considering I would probably have to take it down after taking some photos. So...I did some problem solving and decided to make it a standing dandelion, using an old lamp stand we had just sitting in the garage. To make the tufts look like they were flying, I cut a wire clothing hanger as shown in the diagram to the right. All the tufts were attached by fishing wire to the hanger and the fishing line. It's not ideal, since you can see the wire of the hanger, but the ones hanging from the fishing wire turned out nicely, especially because it's free to dangle around and seems more free flowing. If I had a permanent place to put it, it would probably be a good idea to paint the color of the wire the same as the background wall, at least to camouflage it a little better.

I will be posting pictures more pictures of how I made it within the next few days.

Dandelion in the Night

With my heart set on finishing my dandelion today, I am finally done and here are some pictures of the finished project. It is 6' 2" tall and the diameter is about 20 inches. I'll take a picture of myself with dandelion for scale sake tomorrow. :)

As photographers and artists know, lights change the way we perceive color and can totally change the composition of the picture. Tonight I will post night pictures, some where I play with the shadows the come from the lighting. Tomorrow, I will post some daylight photos that will hopefully do a better job capturing the actual dandelion.

Well...without much ado, here it is!

 

More photos coming soon! :)

Suspense

For those of you who are wondering, I haven't given up my goal yet! :) I've realized my dandelion project was a bit ambitious and it is taking me longer than I expected...and my original plan is requiring some adjusting, so I've needed to do some problem solving. So, my one week project has become a 2+ (hopefully no more than 3-week) project. But for proof that I am working on it, here are some pictures. These are the dandelion tufts made of skewers ("stem"), paper (the frilly top part), and foam clay (the bottom seed part). I've managed to make 100 so far, but am needing to make much more. As tedious and time consuming as this project has been, I've had some wonderful moments snipping paper underneath my the yellow light of my desk lamp and listening to jazz as I let my thoughts wander. :)

Painting the first batch of skewers

The evolution of a dandelion tuft

A completed tuft waiting to become part of the whole...

The beginnings of batch 3. Skewer number 101? Waiting to be clayed.

TO BE CONTINUED...